weave progresses

So having finished the first cushion cover, I decided to change the tie up on one of the treadles (change which threads are raised and lowered on one of the pedals) and then change the treadling (pedalling) sequence and add a new thread (red) into the mix. Voila, variation no. 2

With a much more intuitive treadling sequence, this weave is flying along. 

In case you're wondering, what look to be spacing faults, particularly in the "warp" (the threads running from front to back) are caused by the reed (a comb like device that keeps the warp threads in order as they pass through the beater). I only have one reed so when the density of the warp threads doesn't match your reed, you have to improvise. In this case sometimes two threads and sometimes three threads go between each tooth in the reed. This tends to alter the even spacing of the warps whilst they are under tension and weaving is taken place. Once off the loom and the fabric is washed the threads will find an even spacing. 

Transition between variations one and two